|
Muneeb I. Khan
29628 Island View Drive Rancho Palos Verdes, CA 90275
Tel: 425-345-7969, 310-480-4192 or 310-480-8280 or 424-206-2321
muneebkhan_86@hotmail.com
To work in a challenging position
around a creative and innovative environment.
Bachelors of
Engineering
August 2004 - May
2008
Major: Metallurgy & Materials
Engineering
GIK Institute of Engineering Sciences
& Technology, Topi, Swabi, Pakistan
Internee – Oil Production
Division
June
2007 - July 2007
MOL Oil
and Gas Co. B.V., Islamabad
Spent 8-weeks of rigorous work in
the Oil Plant Production Department with the following activities:
- Studied the process flow diagram and the P&ID's of
the entire Oil Plant while performing line tracing of the site.
- Learned Step-by-Step Safety
practices & Procedures for Oil Plant and adjacent facilities.
- Completed learning of Oil Wells
operating procedures and safe shutdown/startup.
- Completed the role of SSV panel
and emergency shutdown procedures & relevant logic controls.
- Performed the identification of
the need for a chemical injection system for the injection of corrosion inhibitors,
Methanol injection, and antifoaming agents.
- Operated the PLC to monitor
plant parameters as well as for valve and instrument control to maintain
normal temperature and pressure conditions and thereby controlling
Condensate RVP and gas composition.
- Learned the role of separator
and degasser vessels and the condensate heater for condensate
stabilization to maintain its RVP as per API standards.
- Performed detailed operation of
the Mechanical refrigeration unit (MRU) and its function in controlling gas
composition.
- Learnt the role of surface
coating and cathodic protection system which was installed on the plant
area for protection against surface corrosion of pipelines and other
equipment.
- Investigated the role of
corrosion inhibitors in providing protection against internal corrosion of
pipelines in sour gas environment.
- Worked as the “project
supervisor” for establishing a firefighting system throughout the plant
area.
"Indigenous development of
diamond cutting blades for application in marble industries of Pakistan”
The objective of this project was to introduce novel blade material for diamond
impregnated composite segments which could be manufactured more economically in
Pakistan and also exhibited an improvement in its cutting performance. My role
in the team was to perform experimental work in the laboratory to manufacture
diamond impregnated composite segments and test the samples for bond strength,
matrix hardness, and composite densification. The results of this work proved
the alloy composition selected by our team would perform better for cutting
marble as compared to the material that was already being used by the local
manufacturers and suppliers of diamond cutting blades.
Corrosion
and Protection – “Metallurgical processing to improve corrosion resistance”
The report
focused on the following metallurgical routes: Coating, alloying addition,
surface treatments, and heat treatment to enhance corrosion resistance of
metals/alloys.
Composite Materials – “Thermal management of electronic devices and systems”
Thermal
management techniques usually involve the use of liquid coolants, cooling fans,
and heat sinks. The primary purpose of the report was to introduce and discuss
novel composite materials for use in manufacturing heat sinks which would
improve thermal dissipation from such electronic systems but not at the cost of
other factors such as weight, dimensional stability, thermal stability,
machinability etc.
Manufacturing
Technology – “Failure analysis of the turbine blade of a crashed fighter plane
of the Pakistan Air Force (PAF)”
Metallographic
evaluation was carried out on the turbine blade which revealed its composition,
metallographic structure, and surface coating. The reasons for its failure were
determined thereon and improvements in the choice of base metal alloy, thermal
barrier coating, and manufacturing technique were suggested.
Heat Treatment – “Report on Maraging Stainless Steels”
Report
focused on the composition, heat treatments cycle, and manufacturing process of
Maraging Stainless Steels and the way its properties are affected by the above
parameters. The use of these steels in aerospace, military, and transportation
applications were also discussed.
Ceramics
and Glasses – “Processing and industrial applications of Alumina powder”
The
processing technique used industrially to manufacture alumina powder was
discussed and an analysis of how powder properties varied with different powder
processing techniques. A comparison of how different processing techniques
yielded different powder properties and their suitability for different
applications was also carried out.
- Materials evaluation and testing
(Mechanical Testing, Metallographic Inspection, NDT)
- Failure Analysis
- MS office (Word, Excel,
PowerPoint), MS Project, QFD Capture.
- Executive member of Student council, Washington
International School
- Leader of sports club,
Washington International school
Extra Curricular Activities
- Member of the Cricket team, GIK Institute
- Member of the organizing team
responsible for arranging Open House Career fair 2006, GIK Institute
- Participated in E-Gaming
competitions organized by Netronix, GIK Institute
- Senior member of the organizing
team responsible for arranging WIS all Karachi GALA
- Member of the Cricket team,
Washington International School Karachi
- Member of organizing team
responsible for organizing the Silver Jubilee Celebration of Beaconhouse
School System at Jubilee Campus, Karachi
|
